HyVibe Essential Firmware Update Version 1.5.0

HyVibe Essential Firmware Installation Instructions 

UPDATE THE HYVIBE BY CONNECTING TO A COMPUTER

– Step 1:  Download the V1.5.0 firmware file here.

– Step 2: Connect the HyVibe to your computer with a USB C-A cable.

Step 3: Access the Bootloader menu:
Hold the L button while powering ON the H2E.
Powering ON can be done with button 3 of the remote or the jack panel button. Entering the Bootloader is confirmed by all the LEDs blinking one bye one in sequence

Activate USB
Press button 1 to activate USB.
Corresponding LED should light up and the HyVibe drive should appear on your computer.
Drag the unzipped V1.5.0 HEF file to the parent directory of the HyVibe drive on your computer.
Press button 1 again to deactivate USB mode.

Exit bootloader
Press button L to exit Bootloader and restart the device. The Firmware will install itself during the reboot.